Harmonic ProView 2900 - Rename Preset

Chapter 5: Operation and Management ProView 2900 Preset Menu
© Harmonic Inc. Manual p/n 101543/Ver 1.0 5-8 ProView 2900 Series/SW Version 1.94
5.2.3. Rename Preset
The Rename submenu allows editing a stored preset name.
TO RENAME A PRESET THROUGH THE FRONT PANEL:
1. Access the Overwrite Existing screen. From the front panel go to
Root 

 Preset 

 Rename.
The following screen appears, lists all stored presets and allows selecting a
preset to rename.
Name
Name Name
Name
1
1 1
1 Default
DefaultDefault
Default
2
2 2
2 Setup_1
Setup_1Setup_1
Setup_1
3
3 3
3 Setup_2
Setup_2Setup_2
Setup_2
4
4 4
4 Setup_3
Setup_3Setup_3
Setup_3
2. Select one of the listed presets by using the [Up], [Down] and [ENTER] keys.
When selecting a preset to rename – the Rename edit screen appears:
Rename
RenameRename
Rename
S
SS
Setup_1
etup_1etup_1
etup_1
3. Name the preset by using the keypad. To change a character, use the [Up] and [Down]
keys. To move between the characters, use the [LEFT] and [RIGHT] keys. To
save, press [ENTER].
TO RENAME A PRESET THROUGH THE WEB-INTERFACE:
1. From the management bar, click on the
Preset tab.
2. Click on Rename tab.
3. Open the Existing Configuration drop-
down menu. From the list select a
preset to rename.
4. Type a new name for the preset in the New-Name textbox.