Chapter 5: Operation and Management ProView 2900 Status Menu
© Harmonic Inc. Manual p/n 101543/Ver 1.0 5-27 ProView 2900 Series/SW Version 1.94
• IP Data Port Speed – 10 Base-T, 100 Base-T
• IP Data Port Duplex – Displays the duplex operation mode of the IP port (Full or Half).
When the IP Data Port link status is down or when the IP Data Port is disconnected, the
horizontal bars [--] are displayed.
5.4.7. GenLock Status
This feature will be supported in future software releases.
5.4.8. Conditional Access Status Menu
The Conditional Access status menu allows viewing conditional access parameters statuses.
To access the Conditional Access Status Menu in the front panel control interface go to
Status
Conditional Access
The following screen displays the Conditional Access Status menu:
Conditional Access
Conditional Access Conditional Access
Conditional Access
1
11
1-
--
-3
33
3-
--
-8
88
8
1 Common Interface
1 Common Interface1 Common Interface
1 Common Interface
2 BISS
2 BISS2 BISS
2 BISS
3 Embedded
3 Embedded3 Embedded
3 Embedded
Caution
The Conditional Access Status menu must be handled by qualified users who are familiar with
the DVB-S2 standard and protocols.
5.4.8.1. Common Interface
The Common Interface Menu displays information on the CAMs inserted to the ProView 2900
CI Slot. The status menu for Slot 1 and Slot 2 is identical unless one of the CI Slots is not
equipped with a CAM.
To access the Common Interface Menu in the front panel control interface go to
Status
Conditional Access
Common Interface.
The following screen displays the Common Interface Status menu:
Common
Common Common
Common Interface
Interface Interface
Interface
1
11
1-
--
-3
33
3-
--
-8
88
8-
--
-1
1 1
1
1 Slot1
1 Slot11 Slot1
1 Slot1
2 Slot2
2 Slot22 Slot2
2 Slot2
The Slot (1..2) Menu displays information on a CAM in Slot (1..2).
To access the Slot 1 Menu in the front panel control interface go to Status
Conditional
Access
Common Interface
Slot 1.
To Next Page
Loading...
