Harmonic ProView 2900 - Destination IP Address; UDP Source Port; Dest IP Address; Num of Packets

Chapter 12: GenLock Configuration Menu IP-Out-Port Configuration Menu
© Harmonic Inc. Manual p/n 101543/Ver 1.0 11-8 ProView 2900 Series/SW Version 1.94
11.3.6. Destination IP Address
The Destination IP Address parameter allows setting the required destination IP address.
Dest IP Address
Dest IP Address Dest IP Address
Dest IP Address
242.001.001.026
242.001.001.026242.001.001.026
242.001.001.026
The value in each field must be a number between 0 and 255.
11.3.7. UDP Source Port
The UDP Source Port parameter allows setting the source UDP port number.
UDP Source Port
UDP Source Port UDP Source Port
UDP Source Port
02000
0200002000
02000
<00000
<00000<00000
<00000-
--
-65535>
65535>65535>
65535>
The value in each field must be a whole number between 0 and 65535.
11.3.8. UDP Destination Port
The UDP destination Port parameter allows setting the UDP Destination port number.
UDP Destination Port
UDP Destination Port UDP Destination Port
UDP Destination Port
02000 [Hex]
02000 [Hex]02000 [Hex]
02000 [Hex]
<00000
<00000<00000
<00000-
--
-65535>
65535>65535>
65535>
The value is a whole number between 0 and 65535.
11.3.9. Number of Packets
The Number of Packets parameter allows setting the number of MPEG packets to be
contained in an IP frame (using the following Edit Value Screen).
Num of Packets
Num of Packets Num of Packets
Num of Packets
07
07 07
07
<01
<01<01
<01-
--
-07>
07>07>
07>
Available values are between 1 and 7.