Chapter 10: Audio Configuration Menu Test Tone
© Harmonic Inc. Manual p/n 101543/Ver 1.0 10-7 ProView 2900 Series/SW Version 1.94
DISABLE – disables the test tone
1000 Hz – creates a 1 kHz audio signal and outputs it through this Audio output
NOTES
It is required to stop all ProView 2900 decoding before performing the Audio Output testing.
Only Audio Outputs 1, 3, and 4 can currently be tested using the ProView 2900 internal 1 kHz
test tone.
To Next Page
Loading...
