Harmonic ProView 2900 - D.7 IP Receiver Configuration

Appendix D: ProView 2900 Configuration File
© Harmonic Inc. Manual p/n 101543/Ver 1.0 D-3 ProView 2900 Series/SW Version 1.94
D.7 IP Receiver Configuration
The ProView 2900 Configuration file holds the following IP Receiver parameters:
• MPEGoIP1/ MPEGoIP2
(Logical source , IP address type, IP multicast address , UDP destination port, FEC
Colum port)
• General
(Selected active Port, Redundancy enable/disable, Redundancy Delay, De-Jitter Delay,
FEC enable/disable)