Chapter 5: Operation and Management ProView 2900 Status Menu
© Harmonic Inc. Manual p/n 101543/Ver 1.0 5-19 ProView 2900 Series/SW Version 1.94
• HW Revision – FPGA hardware Revision
• SW Version – software date and software version
• Configuration – displays “OK” if receiver configuration is valid, or “Mismatch” if it has
inconsistencies
• Active Input - the actual input active
• Receive Mode – displays “UDP” or “RTP” according to the type of received data
• MPEG Packet Size – size of received packets (in bytes). Can be either 188 or 204 bytes
• Rx Bitrate Current – current rate of received data (in MHz)
To Next Page
