Wireless LAN – WLAN
106
3.7
IEEE 802.11i for point-to-point connections
BAT54-Rail/F..
Release
7.54
06/08
When configuring point-to-point connections, an alternative to the MAC ad-
dresses is to use the station names of the remote stations.
First of all the station name is entered into the point-to-point settings in the
Wireless Routers or Access Points.
D LANconfig: Wireless LAN
General Physical WLAN settings
Point to point
D WEBconfig: Setup
Interfaces WLAN interpoint settings
Note: For models with multiple WLAN modules, the station name can be en-
tered separately for each physical WLAN interface.
In the point-to-point configuration, select the identification by station name
and enter the name of the corresponding station.
D LANconfig: Wireless LAN
General Point to point partners
D WEBconfig: Setup
Interfaces WLAN interpoint peers
To Next Page
Loading...
