Configuration and management
BAT54-Rail/F..
Release
7.54
06/08
4.8
Managing administrators rights
151
D Local administrator with read and write access: Also has full access to the
configuration, although the following options are prohibited:
D Upload firmware onto the device
D Upload configuration onto the device
D Configuration with LANconfig
Note: Local administrators with write access can also edit the admin table.
However, a local administrator can only change or create entries for users
with the same or less rights than himself. It follows that a local administra-
tor cannot create a supervisor access and assign himself those rights.
D Local administrator with read access: Can read the configuration with Tel-
net or a terminal program, but cannot change any values. The administra-
tors can be assigned certain configuration options via their function rights.
D None: Cannot read the configuration. The administrators can be assigned
certain configuration options via their function rights.
U Function rights
Function rights can be used to grant the following options to users:
D Basic Settings Wizard
D Security Settings Wizard
D Internet Connection Wizard
D Selection of Internet Provider Wizard
D RAS Account Wizard
D LAN-LAN Connection Wizard
D Change time and date
D Search for further devices
D WLAN link test
D a/b Wizard
4.8.2 Administrators' access via TFTP and SNMP
The additional access possibilities for administrators are generally used for
configuring the device with Telnet, terminal programs or SSH access. How-
ever, the other administrators can also access the device via TFTP or SNMP.
U Access with LANconfig
A user with supervisor rights can login to LANconfig by entering his user data
into the Password field of the login window in the combination <User-
name>:<Password>.
To Next Page
Loading...
