Hirschmann BAT54-Rail - 12.2 Vendor Class and User Class Identifier on the DHCP Client

More services
472
12.2 Vendor Class and User Class Identifier on
BAT54-Rail/F..
Release 7.54 06/08
12.2Vendor Class and User Class
Identifier on the DHCP Client
The DHCP client in BAT can insert additional information in the DHCP re-
quest sent, which simplify request recognition within the network.
D The vendor class identifier (DHCP option 60) shows the device type. The
vendor class ID is always transmitted.
D The user class identifier (DHCP option 77) displays a user-defined string,
which can be entered under
Setup/DHCP or in LANconfig in the configura-
tion area under 'TCP/IP' on the 'DHCP' tab in the 'User Class ID' field (de-
fault: empty). The user class ID is only transmitted when the user has
configured a value.