LANtools network management
BAT54-Rail/F..
Release
7.54
06/08
5.2
Project management with LANconfig
169
5.2.1 User-specific settings for LANconfig
The program settings for LANconfig are saved to the file 'lanconf.ini' located
in the program directory when the program is ended. This includes,
among others, the displayed devices, directory structure, selected language,
etc. When the program is started, LANconfig reads this ini file and restores
the previous status of the software. To save the ini file, the user needs a write
authorization to the program directory.
As an alternative to the .ini file in the program directory, the program settings
can be read from another source. The current user's user directory can be
chosen, or indeed any other lanconf.ini from any location:
D By selecting the user directory, users can save their personal settings
even if they don't have a write authorization for the program directory.
D Selecting an alternative storage location can be used, for example, to
transfer program settings to any other LANconfig installation, or to save
the program settings to a central location in the network for use by multi-
ple users.
The parameters for configuration can be found under the following paths:
LANconfig: Options
 Application
D Use user-specific settings
Activates the use of the lanconf.ini file in the current user's directory
..\User\Application Files\BAT\LANconfig
.
With this option activated, changes to the program settings are saved to
this ini file.
D Possible values: On/off
D Default: Off
To Next Page
Loading...
Need help?
General
