Configuration and management
128
4.4
Configuration using different tools
BAT54-Rail/F..
Release
7.54
06/08
D Via the serial configuration interface 쐋.
D Via a ISDN connection 쐏
4.4 Configuration using different
tools
4.4.1 LANconfig
Start LANconfig by, for example, using the Windows Start menu: Start
Programme
Hirschmann BAT Hirschmann LANconfig. LANconfig
will now automatically search for devices on the local network. It will automat-
ically launch the setup wizard if a device which has not yet been configured
is found on the local area network LANconfig.
Note: If the firewall is activated the LANconfig might not be able to find the
new device in the LAN. In this occasion deactivate the firewill whilst the
configuration.
Your BAT device is equipped with an extensive firewall and protects
your computer even if no further firewall is active.
쐋쐇쐃쐏
ISDN
To Next Page
Loading...
