LANtools network management
BAT54-Rail/F..
Release
7.54
06/08
5.2
Project management with LANconfig
175
U View a full list of all firmware versions
If your search in the archive did not reveal a new firmware version, you can
alternatively view a full list of all of the firmware files that have been found.
You can, for example, switch back to an older version. LANconfig displays all
versions found for the marked devices, including the version currently active
in each device. For each device, you can select precisely one firmware ver-
sion that will then be uploaded onto the device.
5.2.6 Password protection for SNMP read-only
access.
The read-only access to a BAT device via SNMP—for example with
LANmonitor--can be password protected. This uses the same user data as
with access to LANconfig. Password protection of SNMP access means that
the user data must be entered before information about the device status,
etc. can be accessed over SNMP.
To Next Page
Loading...
Need help?
General
