More services
BAT54-Rail/F..
Release
7.54
06/08
12.6
Time server for the local net
487
12.6.1 Configuration of the time server under
LANconfig
To provide the current time in the local network your BAT has to regularly ap-
ply the time from a time server. For this so called real time clock click in the
configuration area 'Date & time' on the tab 'Synchronization'. Under 'NTP set-
tings' open the list of time servers by clicking on the button Time Server ....
With the button Add... you can extend the list.
With these settings only the BAT applies the time from public time servers.
To provide the real time for the remaining device enable the local time server
under the tab 'Time Server'. Furthermore activate the broadcast mode and
enter the broadcast interval.
To Next Page
Loading...
Need help?
General
