LANtools network management
BAT54-Rail/F..
Release
7.54
06/08
5.2
Project management with LANconfig
179
U Configuration of the specific communication settings
For configuring the specific communications settings, the properties dialog of
a device is opened via the context menu (right-click on mouse):
D HTTPS, HTTP, TFPT
Select the communications protocols as described in the global settings:
In the fields under the protocols, the port to be used can be entered using
the following default values:
D HTTPS: 443
D HTTP: 80
D TFTP: 69
D Prefer checks via TFTP
Preferred checking via TFTP as described in the global settings.
Caution: For all specific communications settings, the global settings are
considered to be superordinate. A protocol can therefore only be used for
operating a device when it is also activated in the global settings.
5.2.8 LANconfig behavior at Windows startup
LANconfig can be automatically started when the operating system starts.
To Next Page
Loading...
Need help?
General
