More services
488
12.6
Time server for the local net
BAT54-Rail/F..
Release
7.54
06/08
12.6.2 Configuration of the time server with
WEBconfig or Telnet
When configuring with WEBconfig or Telnet you can find the required param-
eters in the following areas:
12.6.3 Configuring the NTP clients
The NTP clients must be configured so that they use the time information
from the BAT. Not all operating systems provide an integrated NTP client:
Windows XP does so, for other Windows operating systems a separate NTP
client is required, Linux distributions have to be installed with NTP.
The settings of date and time in a XP system can be opened with a double
click on the time at the bottom left, where you can select the server for syn-
chronization.
Configuration tool Run
WEBconfig Expert Configuration
 Setup  NTP
Terminal/Telnet
cd /Setup/NTP-Modul
To Next Page
Loading...
Need help?
General
