Configuration and management
BAT54-Rail/F..
Release
7.54
06/08
4.8
Managing administrators rights
155
Said differently it is a disjunction of the hexadecimal values:
U Examples:
The following command sets up a new user in the table who, as local admin-
istrator "Smith" with the password "BW46zG29", can select the Internet pro-
vider. The user will be activated immediately:
set Smith BW46zG29 yes Admin-RW 00000008
The following command extends the function rights such that user "Smith"
can also run the WLAN link test (the asterisks stand for the values which are
not to be changed):
set Smith * * * 00000108
4.8.4 Limitation of the configuration commands
The availability of commands when configuring the devices with Telnet or a
terminal program depends on the user's rights:
Description Value
Security Wizard
0x00000002
Selection of Internet provider
0x00000008
RAS Wizard
0x00000010
Change time
0x00000040
WLAN Link Test
0x00000100
Disjunction
0x0000015a
Command Supervisor Local administrator Remark
activateimage
✔
cfgreset
✔
linktest
✔
The 'linktest' command can also be executed
if the user possesses the function right to
carry out a WLAN link test
readconfig
✔
writeconfig
✔
writeflash
✔
setenv
✔✔
testmail
✔✔
time
✔✔
The 'time' command can also be executed if
the user possesses the function right to set
the system time
To Next Page
Loading...
