Wireless LAN – WLAN
48
3.3
Protecting the wireless network
BAT54-Rail/F..
Release
7.54
06/08
WEBconfig, Telnet or terminal program
Under WEBconfig, Telnet or a terminal program, you will find the access list
for the wireless network under the following paths:
3.3.2 Standard WEP encryption
As of LCOS version 4.00, WEP128 encryption is activated for every uncon-
figured device as standard.
If your device has one or more WLAN interfaces, you can also carry out the
"wireless" configuration from a computer with a WLAN card. To use a WLAN
client to connect to a new BAT access point for wireless configuration, the
WLAN client must be programmed with the 13-character standard WEP key.
Configuration tool Menu/Table
WEBconfig Expert configuration
Setup WLAN Access-list
Terminal/Telnet
Setup/WLAN/Access-list
To Next Page
Loading...
