Hirschmann BAT54-Rail User Manual

12
BAT54-Rail/F..
Release 7.54 06/08
12.5 The SYSLOG module 484
12.5.1 Setting up the SYSLOG module 484
12.5.2 Example configuration with LANconfig 484
12.6 Time server for the local net 486
12.6.1 Configuration of the time server under LANconfig 487
12.6.2 Configuration of the time server with WEBconfig or Telnet
488
12.6.3 Configuring the NTP clients 488
12.7 Scheduled Events 491
12.7.1 Regular Execution of Commands 491
12.7.2 CRON jobs with time delay 492
12.7.3 Configuring the CRON job 493
12.8 PPPoE Servers 495
12.8.1 Introduction 495
12.8.2 Example application 495
12.8.3 Configuration 498
12.9 RADIUS 500
12.9.1 How RADIUS works 502
12.9.2 Configuration of RADIUS as authenticator or NAS 502
12.9.3 Configuring RADIUS as server 509
12.10 Extensions to the RADIUS server 511
12.10.1 New authentication method 511
12.10.2 EAP authentication 512
12.10.3 RADIUS forwarding 513
12.10.4 RADIUS server parameters 515
12.11 RADSEC 517
12.11.1 Configuring RADSEC for the client 517
12.11.2 Certificates for RADSEC 518
13 Appendix 519
13.1 Error messages in LANmonitor 519
13.1.1 General error messages 519
13.1.2 VPN error messages 519
13.2 SNMP Traps 523
13.3 Radio channels 524
13.3.1 Radio channels in the 2,4 GHz frequency band 524
13.3.2 Radio channels in the 5 GHz frequency band 524
13.3.3 Radio channels and frequency ranges for Indoor and Out-
door operating 526

Hirschmann BAT54-Rail Specifications

General

Brand	Hirschmann
Model	BAT54-Rail
Category	Wireless Access Point
Language	English