LANtools network management
BAT54-Rail/F..
Release
7.54
06/08
5.3
Scripting
191
Example: For a BAT that is set up only for Internet-by-call via ISDN, the
command readscript will produce the following console output (assuming
that there are no further restrictions):
From this example it is possible to recognize the behavior or the script
that was generated with the command
readscript
.
D First of all the parameters with values different from the default set-
tings are displayed.
D The values in the tables are deleted (
del *
) and replaced with the cur-
rent values in the configuration (
add *
).
D Only those table entries or values which cannot be left empty are di-
rectly changed with the
Set
command.
Note: The table lines or strings containing passwords are displayed in plain
text as this is the format required by the Telnet user interface.
To Next Page
Loading...
