LANtools network management
BAT54-Rail/F..
Release
7.54
06/08
5.3
Scripting
193
This command returns the parameters addressed by the
PATH
to their
factory settings. If
PATH
indicates a branch of the menu tree, then the
option
-r
(recursive) must be entered.
Note: Supervisor rights are necessary to execute this command.
D
beginscript
The command
beginscript
switches a console session into script mode.
In this state, commands entered are not transferred directly to the BAT's
configuration RAM but initially to the device's script memory. The com-
mands will only be transferred to and started in the configuration RAM
via a script session by executing the command exit.
Note: Supervisor rights are necessary to execute this command.
D
show script
The command
show script
displays the content of the most recently exe-
cuted script and an overview of the currently running scripts. The names
displayed in this output can be used to interruption scripts early (’kill-
script’ → page 193).
Note: Supervisor rights are necessary to execute this command.
D
killscript
The command killscript deletes the content of a script session that has
not yet been executed. The script session is selected by its name (’show
script’ → page 193).
Note: Supervisor rights are necessary to execute this command.
D
flash Yes/No
To Next Page
Loading...
