Routing and WAN connections
396
11.7
Changes in other services
BAT54-Rail/F..
Release
7.54
06/08
Note: We recommend that only experienced network specialists change the
pre-setting for the broadcast address. Errors in the configuration here can
lead to costly connections being established!
D Default: 0.0.0.0 (broadcast address is determined automatically).
D Standard gateway
As standard, the BAT Router issues its own IP address as the gateway
address to computers making requests. If necessary the IP address of
another gateway can be entered here.
D Default: 0.0.0.0 (the IP address of the BAT Router in this network is
taken as the gateway).
U Name server addresses
The addresses for the name servers for this network are defined here.
D DNS default
IP address of the DNS name server for the forwarding of DNS requests.
D Default: 0.0.0.0
The IP address of the BAT Router in this network is communicated as
the DNS server if the DNS server is activated for this network.
The the DNS server is not active for this network, then the IP address
in the global TCP/IP settings is communicated as the DNS server.
D DNS backup
IP address of the backup DNS name server for the forwarding of DNS
requests, in the event that the first nameserver should fail.
D Default: 0.0.0.0
The IP address from the global TCP/IP settings is communicated as
the backup DNS server.
D NBNS default
IP address of the NetBIOS name server for the forwarding of NetBIOS
requests.
D Default: 0.0.0.0
The IP address of the BAT Router in this network is communicated as
the NBNS server if the NetBIOS proxy is activated for this network.
The the NetBIOS proxy is not active for this network, then the IP
address in the global TCP/IP settings is communicated as the NBNS
server.
D NBNS backup
IP address of the backup NBNS name server for the forwarding of NBNS
requests, in the event that the first nameserver should fail.
To Next Page
Loading...
Need help?
General
