Routing and WAN connections
BAT54-Rail/F..
Release
7.54
06/08
11.7
Changes in other services
411
D End port
D-port to (end port)
D Peer
Remote station which applies for this entry. If no peer is entered then the
entry applies to all peers.
D Intranet address
Internet address that a packet within the port range is forwarded to.
D Map port
Port used for forwarding the packet.
D Protocol
Protocol which applies for this entry.
D Values: TCP, UDP TCP+UDP
D Default: TCP+UDP
D WAN address
WAN address which applies for this entry. If the device has more than one
static IP address, then this allows port forwarding to be limited to certain
connections.
D Values: Valid IP address
D Default: 0.0.0.0
D Particular values: With the IP address 0.0.0.0 the address assigned to
the connection will be used automatically.
D Entry active
Switches the entry on or off.
D Comment
Comment on the defined entry (64 characters)
To Next Page
Loading...
