Hirschmann BAT54-Rail User Manual

BAT54-Rail/F..
Release 7.54 06/08
5
4.6 New firmware with Hirschmann FirmSafe 143
4.6.1 This is how Hirschmann FirmSafe works 143
4.6.2 How to load new software 145
4.7 How to reset the device? 148
4.8 Managing administrators rights 150
4.8.1 Rights for the administrators 150
4.8.2 Administrators' access via TFTP and SNMP 151
4.8.3 Configuration of user rights 153
4.8.4 Limitation of the configuration commands 155
4.8.5 HTTP tunnel 156
4.9 Named loopback addresses 159
4.9.1 Loopback addresses with ICMP polling 160
4.9.2 Loopback addresses for time servers 161
4.9.3 Loopback addresses for SYSLOG clients 162
5 LANtools network management 165
5.1 Switch UI language 166
5.2 Project management with LANconfig 166
5.2.1 User-specific settings for LANconfig 169
5.2.2 Directory structure 170
5.2.3 Multithreading 171
5.2.4 Better overview in LANconfig with more columns 172
5.2.5 Manual and automatic searches for firmware updates 173
5.2.6 Password protection for SNMP read-only access. 175
5.2.7 Device-specific settings for communications protocols 177
5.2.8 LANconfig behavior at Windows startup 179
5.3 Scripting 181
5.3.1 Applications 181
5.3.2 Scripting function 182
5.3.3 Generating script files 183
5.3.4 Uploading configuration commands and script files 186
5.3.5 Multiple parallel script sessions 190
5.3.6 Scripting commands 190
5.3.7 WLAN configuration with the wizards in LANconfig 194
5.4 Group configuration with LANconfig 196
5.4.1 Create a group configuration 197
5.4.2 Update device configurations 199
5.4.3 Update group configurations 200
5.4.4 Using multiple group configurations 200

Hirschmann BAT54-Rail Specifications

General

Brand	Hirschmann
Model	BAT54-Rail
Category	Wireless Access Point
Language	English