Create C300 Controller and CEE function blocks
To configure a C300 Controller block
R301.1 Experion C300 Controller User's Guide 39
11/06 Honeywell
Step Action Result
TIP
If you have a Distributed Server Architecture (DSA), you must enter the Control Area
assignment for this Server. (Note that area code assignments are made through the
Station application.) If you do not have a DSA, you can skip this field if area is not
enabled through the Station application.
10
Use the on-line help as a guide to
complete the configuration entries on this
tab.
Click the Server Displays tab.
Calls up the Server Displays
configuration form.
To Next Page
Loading...
