98
View
Interface view
Default level
2: System level
Parameters
value: Startup query count, the number of queries the IGMP querier sends on startup. The range is from
2 to 5.
Description
Use igmp startup-query-count to configure the startup query count on the current interface.
Use undo igmp startup-query-count to restore the default.
By default, the startup query count is set to the IGMP querier's robustness variable.
Related commands: igmp robust-count and startup-query-count.
Examples
# Set the startup query count to 3 on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] igmp startup-query-count 3
igmp startup-query-interval
Syntax
igmp startup-query-interval interval
undo igmp startup-query-interval
View
Interface view
Default level
2: System level
Parameters
interval: Startup query interval in seconds, the interval between general queries that the IGMP querier
sends on startup. The range is from 1 to 18000.
Description
Use igmp startup-query-interval to configure the startup query interval on the current interface.
Use undo igmp startup-query-interval to restore the default.
By default, the startup query interval is 1/4 of the IGMP general query interval.
Related commands: igmp timer query and startup-query-interval.
Examples
# Set the startup query interval to 5 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
To Next Page
Loading...
Need help?
General