349
Use undo startup-query-interval to restore the default.
By default, the startup query interval is 1/4 of the "MLD query interval".
Related commands: mld startup-query-interval and timer query.
Examples
# Set the startup query interval to 5 seconds globally.
<Sysname> system-view
[Sysname] mld
[Sysname-mld] startup-query-interval 5
timer other-querier-present (MLD view)
Syntax
timer other-querier-present interval
undo timer other-querier-present
View
MLD view
Default level
2: System level
Parameters
interval: Specifies an MLD other querier present interval in seconds, in the range of 60 to 300.
Description
Use timer other-querier-present to configure the MLD other querier present interval globally.
Use undo timer other-querier-present to restore the default.
By default, MLD other querier present interval = [ MLD query interval ] × [ MLD querier’s robustness
variable ] + [ maximum response delay for MLD general queries ] /2.
Related commands: display mld interface, max-response-time, mld timer other-querier-present,
robust-count, and timer query.
Examples
# Set the MLD other querier present interval to 200 seconds globally.
<Sysname> system-view
[Sysname] mld
[Sysname-mld] timer other-querier-present 200
timer query (MLD view)
Syntax
timer query interval
undo timer query
View
MLD view
To Next Page
Loading...
Need help?
General