HP 3600 v2 Series - Display Multicast Ipv6 Forwarding-Table

299
Description
Use display multicast ipv6 boundary to display the IPv6 multicast boundary information on the specified
interface or all interfaces.
Related commands: multicast ipv6 boundary.
Examples
# Display IPv6 multicast boundary information on all interfaces.
<Sysname> display multicast ipv6 boundary group
IPv6 multicast boundary information
Boundary Interface
FF03::/16 Vlan1
FF09::/16 Vlan2
Table 62 Command output
Field Descri
p
tion
Boundary IPv6 multicast group that corresponds to the IPv6 multicast boundary
Interface Boundary interface that corresponds to the IPv6 multicast boundary
display multicast ipv6 forwarding-table
Syntax
display multicast ipv6 forwarding-table [ ipv6-source-address [ prefix-length ] | ipv6-group-address
[ prefix-length ] | incoming-interface { interface-type interface-number | register } | outgoing-interface
{ exclude | include | match } { interface-type interface-number | register } | statistics | slot slot-number ]
* [ port-info ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
ipv6-source-address: Specifies an IPv6 multicast source address.
ipv6-group-address: Specifies an IPv6 multicast group address, in the range of FFxy::/16, where x and
y represent any hexadecimal number from 0 through F.
prefix-length: Specifies the prefix length of an IPv6 multicast group address or an IPv6 multicast source
address. For an IPv6 multicast group address, the value ranges from 8 to 128. For an IPv6 multicast
source address, the value ranges from 0 to 128. The default is 128 in both cases.
incoming-interface: Displays the forwarding entries whose incoming interface is the specified one.
interface-type interface-number: Specifies an interface by its type and number.
register: Represents a registered interface.
outgoing-interface: Displays the forwarding entries whose outgoing interface is the specified one.
exclude: Displays the forwarding entries whose outgoing interface list excludes the specified interface.
include: Displays the forwarding entries whose outgoing interface list includes the specified interface.