26
[Sysname-vlan2] igmp-snooping query-interval 20
igmp-snooping report source-ip
Syntax
igmp-snooping report source-ip { ip-address | current-interface }
undo igmp-snooping report source-ip
View
VLAN view
Default level
2: System level
Parameters
ip-address: Specifies a source address for the IGMP reports that the IGMP snooping proxy sends. The
address can be any legal IP address.
current-interface: Specifies the IP address of the current VLAN interface as the source address of IGMP
reports that the IGMP snooping proxy sends. If no IP address has been assigned to the current VLAN
interface, the default IP address 0.0.0.0 is used.
Description
Use igmp-snooping report source-ip to configure the source IP address of the IGMP reports that the
IGMP snooping proxy sends.
Use undo igmp-snooping report source-ip to restore the default.
By default, the source IP address of the IGMP reports that the IGMP snooping proxy sends is 0.0.0.0.
Before you configure this command in a VLAN, enable IGMP snooping in the VLAN.
The source IP address configured in the igmp-snooping report source-ip command also applies when the
simulated host sends IGMP reports.
Related commands: igmp-snooping enable.
Examples
# Enable IGMP snooping in VLAN 2 and configure the source IP address of IGMP reports that the IGMP
s n o o p i n g p r ox y s e n d s i n V L A N 2 t o 10 .1.1.1.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] igmp-snooping report source-ip 10.1.1.1
igmp-snooping router-aging-time
Syntax
igmp-snooping router-aging-time interval
undo igmp-snooping router-aging-time
To Next Page
Loading...
Need help?
General