121
View
Public network PIM view, VPN instance PIM view
Default level
2: System level
Parameters
interval: BS period in seconds, with an effective range of 10 to 2,147,483,647.
Description
Use c-bsr interval to configure the BS period, namely, the interval at which the BSR sends bootstrap
messages.
Use undo c-bsr interval to restore the default.
By default, this formula determines the BS period value: BS period = (BS timeout – 10) ÷ 2.
The default BS timeout is 130 seconds, so the default BS period is (130 – 10) ÷ 2 = 60 (seconds).
Related commands: c-bsr and c-bsr holdtime.
Examples
# Set the BS period to 30 seconds in the public network.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] c-bsr interval 30
# Set the BS period to 30 seconds in VPN instance mvpn.
<Sysname> system-view
[Sysname] pim vpn-instance mvpn
[Sysname-pim-mvpn] c-bsr interval 30
c-bsr priority (PIM view)
Syntax
c-bsr priority priority
undo c-bsr priority
View
Public network PIM view, VPN instance PIM view
Default level
2: System level
Parameters
priority: Priority of the C-BSR, in the range of 0 to 255. A larger value of this argument means a higher
priority.
Description
Use c-bsr priority to configure the global C-BSR priority.
Use undo c-bsr priority to restore the default.
By default, the C-BSR priority is 64.
To Next Page
Loading...
Need help?
General