1
IGMP snooping configuration commands
display igmp-snooping group
Syntax
display igmp-snooping group [ vlan vlan-id ] [ slot slot-number ] [ verbose ] [ | { begin | exclude |
include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
vlan vlan-id: Displays the IGMP snooping group information in the specified VLAN, where the vlan-id
argument is in the range of 1 to 4094. If you do not specify a VLAN, this command displays the IGMP
snooping group information in all VLANs.
slot slot-number: Displays the IGMP snooping group information on the specified IRF member switch. The
slot-number argument specifies the ID of an IRF member switch. The value range for the argument
depends on the number of member switches and their member IDs in the IRF fabric. If no IRF fabric exists,
the slot-number argument is the current device number.
verbose: Displays the detailed IGMP snooping group information.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display igmp-snooping group to display IGMP snooping group information, including both dynamic
entries and static entries.
Examples
# Display detailed IGMP snooping group information in VLAN 2.
<Sysname> display igmp-snooping group vlan 2 verbose
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Port flags: D-Dynamic port, S-Static port, C-Copy port, P-PIM port
Subvlan flags: R-Real VLAN, C-Copy VLAN
Vlan(id):2.
Total 1 IP Group(s).
To Next Page
Loading...
Need help?
General