HP 3600 v2 Series User Manual

55
Total 1 RP matched
00001. RP Address: 1.1.1.1
MID: 0, Flags: 0x2100000:0
Uptime: 00:08:32
RPF interface: Vlan-interface1
List of 1 DF interfaces:
1: Vlan-interface2
Table 12 Command output
Field Descri
p
tion
Total 1 RP Total number of RPs.
Total 1 RP matched Total number of matched RPs.
00001 Sequence number of the RP.
MID ID of the RP. Each RP has a unique MID.
Flags
Current state of the RP. Different bits indicate different states of an RP.
Major values of the flags field before the colon are described in Table
11. The value
of the flags field after the colon is 0.
Uptime
Length of time for which the RP has been up, in the format
hours:minutes:seconds.
RPF interface RPF interface to the RP.
List of 1 DF interfaces DF interface list.
display multicast routing-table
Syntax
display multicast [ all-instance | vpn-instance vpn-instance-name ] routing-table [ source-address [ mask
{ mask | mask-length } ] | group-address [ mask { mask | mask-length } ] | incoming-interface
{ interface-type interface-number | register } | outgoing-interface { exclude | include | match }
{ interface-type interface-number | register } ] * [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
all-instance: Specifies all VPN instances.
vpn-instance vpn-instance-name: Specifies a VPN by its name, a case-sensitive string of 1 to 31
characters.
source-address: Specifies a multicast source address.
group-address: Specifies a multicast group address, in the range of 224.0.0.0 to 239.255.255.255.
mask: Specifies the mask of the multicast group address or multicast source address. The default is
255.255.255.255.

HP 3600 v2 Series Specifications

General

Brand	HP
Model	3600 v2 Series
Category	Switch
Language	English