155
Use undo pim hello-option dr-priority to restore the default.
By default, the router priority for DR election is 1.
Related commands: hello-option dr-priority.
Examples
# Set the router priority for DR election to 3 on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim hello-option dr-priority 3
pim hello-option holdtime
Syntax
pim hello-option holdtime interval
undo pim hello-option holdtime
View
Interface view
Default level
2: System level
Parameters
interval: PIM neighbor timeout time in seconds, with an effective range of 1 to 65,535. A value of
65,535 makes the PIM neighbor always reachable.
Description
Use pim hello-option holdtime to configure the PIM neighbor timeout time on the current interface.
Use undo pim hello-option holdtime to restore the default.
By default, the PIM neighbor timeout time is 105 seconds.
Related commands: hello-option holdtime.
Examples
# Set the PIM neighbor timeout time to 120 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim hello-option holdtime 120
pim hello-option lan-delay
Syntax
pim hello-option lan-delay interval
undo pim hello-option lan-delay
View
Interface view
To Next Page
Loading...
