209
Destination: 192.168.80.10/32
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
IpPrecedence: QosLcId:
NextHop: 127.0.0.1 Interface: InLoopBack0
BkNextHop: 0.0.0.0 BkInterface:
RelyNextHop: 0.0.0.0 Neighbour: 0.0.0.0
Tunnel ID: 0x0 Label: NULL
State: Active NoAdv Age: 00h14m49s
Tag: 0
Table 44 Command output
Field Descri
tion
Destination Destination/mask
Protocol Routing protocol that discovered the route
Process ID Process ID
Preference Route preference
Cost Route cost
IpPrecedence IP precedence
QosLcId QoS local ID
NextHop Nexthop of the route
Interface Outgoing interface to reach the destination
BkNextHop Backup next hop
BkInterface Backup outgoing interface
RelyNextHop Recursive next hop
Neighbour Neighbor address
Tunnel ID Tunnel ID
Label Label
State
Route state: Active, Inactive, Adv (can be advertised), NoAdv (cannot be
advertised), GotQ (route recursion succeeded), WaitQ (route recursion has
not succeeded yet)
Age
Age of the route, in the sequence of hours, minutes, and seconds from left to
right
Tag Route tag
display ip multicast routing-table ip-address
Syntax
display ip multicast routing-table ip-address [mask-length |mask ] [ longer-match ] [ verbose ] [ | { begin
| exclude | include } regular-expression ]
To Next Page
Loading...
Need help?
General