139
Field Descri
tion
Holdtime
Holdtime of the PIM neighbor; "forever" means that the PIM neighbor is
always up and reachable.
LAN delay Prune message delay.
Override interval Prune override interval.
State refresh interval
Interval for sending state refresh messages.
Displayed only when the PIM neighbor operates in PIM-DM mode and the
state refresh capability is enabled.
Neighbor tracking Neighbor tracking status (enabled/disabled).
Bidirectional PIM BIDIR-PIM status (enabled/disabled).
display pim routing-table
Syntax
display pim [ all-instance | vpn-instance vpn-instance-name ] routing-table [ group-address [ mask
{ mask-length | mask } ] | source-address [ mask { mask-length | mask } ] | incoming-interface
[ interface-type interface-number | register ] | outgoing-interface { include | exclude | match }
{ interface-type interface-number | register } | mode mode-type | flags flag-value | fsm ] * [ | { begin
| exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
all-instance: Specifies all VPN instances.
vpn-instance vpn-instance-name: Specifies a VPN, where vpn-instance-name is a case-sensitive string of
1 to 31 characters.
group-address: Specifies a multicast group address, in the range of 224.0.0.0 to 239.255.255.255.
source-address: Specifies a multicast source address.
mask: Species the mask of the multicast group/source address, 255.255.255.255 by default.
mask-length: Specifies the mask length of the multicast group/source address, in the range of 0 to 32.
The default is 32.
incoming-interface: Displays PIM routing entries that contain the specified interface as the incoming
interface.
interface-type interface-number: Specifies an interface by its type and number.
register: Specifies the register interface. This keyword is valid only if mode-type is not specified or is sm.
outgoing-interface: Displays PIM routing entries, where the outgoing interface is the specified interface.
include: Displays PIM routing entries, where the outgoing interface list includes the specified interface.
exclude: Displays PIM routing entries, where the outgoing interface list excludes the specified interface.
To Next Page
Loading...
Need help?
General