292
IPv6 PIM snooping does not work in a sub-VLAN of a multicast VLAN.
Related commands: mld-snooping enable.
Examples
# Enable MLD snooping globally, and enable MLD snooping and IPv6 PIM snooping in VLAN 2.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping enable
[Sysname-vlan2] pim-snooping ipv6 enable
reset pim-snooping ipv6 statistics
Syntax
reset pim-snooping ipv6 statistics
View
User view
Default level
2: System level
Parameters
None
Description
Use reset pim-snooping ipv6 statistics to clear statistics for the IPv6 PIM messages learned by IPv6 PIM
snooping.
Examples
# Clear statistics for the IPv6 PIM messages learned by IPv6 PIM snooping.
<Sysname> reset pim-snooping ipv6 statistics
To Next Page
Loading...
Need help?
General