To Next Page

To Previous Page

[Sysname-vpn-instance-mvpn] multicast load-splitting source

multicast longest-match

Syntax

multicast longest-match

undo multicast longest-match

View

System view, VPN instance view

Default level

2: System level

Parameters

None

Description

Use multicast longest-match to configure the device to select the RPF route using longest match.

Use undo multicast longest-match to restore the default.

By default, the device selects the route with the highest priority as the RPF route.

Examples

# Configure the device to select the RPF route based on the longest match principle on the public

network.

<Sysname> system-view

[Sysname] multicast longest-match

# Configure route selection based on the longest match in VPN instance mvpn.

<Sysname> system-view

[Sysname] ip vpn-instance mvpn

[Sysname-vpn-instance-mvpn] multicast longest-match

multicast routing-enable

Syntax

multicast routing-enable

undo multicast routing-enable