427
Description
Use display bgp ipv6 multicast routing-table different-origin-as to display IPv6 MBGP routes originating
from different autonomous systems.
Examples
# Display IPv6 MBGP routing information from different ASs
<Sysname> display bgp ipv6 multicast routing-table different-origin-as
BGP Local router ID is 2.2.2.2
Status codes: * - valid, ^ - VPNv4 best, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
*> Network : 222:: PrefixLen : 64
NextHop : 122::2 LocPrf :
PrefVal : 0 Label : NULL
MED : 0
Path/Ogn: 100 ?
For more information about the fields, see Table 94.
display bgp ipv6 multicast routing-table flap-info
Syntax
display bgp ipv6 multicast routing-table flap-info [ regular-expression as-regular-expression |
[ as-path-acl as-path-acl-number | ipv6-address prefix-length [ longer-match ] ] [ | { begin | exclude |
include } regular-expression ] ]
View
Any view
Default level
1: M o n i t o r l e v e l
Parameters
as-regular-expression: Specifies an AS path regular expression to be matched.
as-path-acl-number: Specifies the number of the specified AS path list to be matched, ranging from 1 to
256.
ipv6-address: Specifies the IPv6 address of a route to be displayed.
prefix-length: Specifies the prefix length of the IPv6 address, in the range of 1 to 128.
longer-match: Matches the longest prefix.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
To Next Page
Loading...
Need help?
General