215
<Sysname> display bgp multicast paths ^200
Address Hash Refcount MED Path/Origin
0x5917100 11 1 200 300i
Table 47 Command output
Field Descri
tion
Address Route address in the local database, in dotted hexadecimal notation.
Hash Hash index.
Refcount Count of routes that reference the path.
MED MED of the path.
Path
AS_PATH attribute of the path, recording the ASs that it has passed to avoid routing
loops.
Origin
ORIGIN attribute of the path:
• i—Indicates that the route is interior to the AS. Summary routes and routes injected
through the network command are considered IGP routes.
• e—Indicates that the route is learned from the Exterior Gateway Protocol (EGP).
• ?—Indicates that the origin of the route is unknown. Routes redistributed from other
routing protocols have this origin attribute.
display bgp multicast peer
Syntax
display bgp multicast peer [ [ ip-address ] verbose ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
2: Monitor level
Parameters
ip-address: Specifies the IP address of an IPv4 MBGP peer to be displayed, in dotted decimal notation.
verbose: Displays the detailed information of the peer or the peer group.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp multicast peer to display IPv4 MBGP peer information.
To Next Page
Loading...
Need help?
General