434
filter-policy export (IPv6 MBGP address family view)
Syntax
filter-policy { acl6-number | ipv6-prefix ipv6-prefix-name } export [ protocol process-id ]
undo filter-policy export [ protocol process-id ]
View
IPv6 MBGP address family view
Default level
2: System level
Parameters
acl6-number: Specifies a basic or advanced ACL used to match against the destination of routing
information. The number is in the range of 2000 to 3999.
ipv6-prefix-name: Specifies the name of an IPv6 prefix list used to match against the destination of
routing information. The name is a string of 1 to 19 characters.
protocol: Filters routes redistributed from the routing protocol. It can be direct, isisv6, ospfv3, ripng, or
static at present. If no protocol is specified, all routes will be filtered when advertised.
process-id: Specifies the process ID of the routing protocol, in the range of 1 to 65535. This argument is
available when the protocol is isisv6, ospfv3, or ripng.
Description
Use filter-policy export to filter outgoing routes by using a specified filter.
Use undo filter-policy export to cancel the filtering of outgoing routes.
By default, no outgoing routing information is filtered.
If a protocol is specified, only routes redistributed from the specified protocol are filtered. If no protocol
is specified, all redistributed routes are filtered.
Examples
# Reference IPv6 ACL 2001 to filter all outgoing IPv6 MBGP routes.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family multicast
[Sysname-bgp-af-ipv6-mul] filter-policy 2001 export
filter-policy import (IPv6 MBGP address family view)
Syntax
filter-policy { acl6-number | ipv6-prefix ipv6-prefix-name } import
undo filter-policy import
View
IPv6 MBGP address family view
Default level
2: System level
To Next Page
Loading...
Need help?
General