233
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family multicast
[Sysname-bgp-af-mul] import-route rip
ipv4-family multicast
Syntax
ipv4-family multicast
undo ipv4-family multicast
View
BGP view
Default level
2: System level
Parameters
None
Description
Use ipv4-family multicast to enter IPv4 MBGP address family view.
Use undo ipv4-family multicast to remove all configurations made in IPv4 MBGP address family view
and return to BGP view.
Examples
# Enter IPv4 MBGP address family view.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family multicast
[Sysname-bgp-af-mul]
network (MBGP address family view)
Syntax
network ip-address [ mask | mask-length ] [ short-cut | route-policy route-policy-name ]
undo network ip-address [ mask | mask-length ] [ short-cut ]
View
IPv4 MBGP address family view
Default level
2: System level
Parameters
ip-address: Specifies a destination IP address.
mask: Specifies the mask of the network address, in dotted decimal notation.
mask-length: Specifies the mask length, in the range of 0 to 32.
To Next Page
Loading...
Need help?
General