379
hello-option holdtime (IPv6 PIM view)
Syntax
hello-option holdtime interval
undo hello-option holdtime
View
IPv6 PIM view
Default level
2: System level
Parameters
interval: IPv6 PIM neighbor timeout time in seconds, with an effective range of 1 to 65,535. A value of
65,535 makes the IPv6 PIM neighbor always reachable.
Description
Use hello-option holdtime to configure the IPv6 PIM neighbor timeout time.
Use undo hello-option holdtime to restore the default.
By default, the IPv6 PIM neighbor timeout time is 105 seconds.
Related commands: pim ipv6 hello-option holdtime.
Examples
# Set the IPv6 PIM neighbor timeout time to 120 seconds globally.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] hello-option holdtime 120
hello-option lan-delay (IPv6 PIM view)
Syntax
hello-option lan-delay interval
undo hello-option lan-delay
View
IPv6 PIM view
Default level
2: System level
Parameters
interval: LAN-delay time in milliseconds, with an effective range of 1 to 32,767.
Description
Use hello-option lan-delay to configure the global value of the LAN-delay time, namely, the period of
time that the device waits before it forwards a received prune message.
Use undo hello-option lan-delay to restore the default.
By default, the LAN-delay time is 500 milliseconds.
To Next Page
Loading...
