86
Table 26 Command output
Field Descri
tion
Host information of VPN-Instance: public net
Information about the hosts that join the group based on the
IGMP SSM mappings on public network interface
Ethernet1/0/1(192.168.1.1) Interface and IP address
(10.1.1.1, 224.1.1.1) (S, G) entry
Host Host IP address
Uptime Host running duration
Expires
Host expiration time, where timeout means that the host has
expired
dscp (IGMP view)
Syntax
dscp dscp-value
undo dscp
View
Public network IGMP view, VPN instance IGMP view
Default level
2: System level
Parameters
dscp-value: Specifies the DSCP value for IGMP messages, in the range of 0 to 63.
Description
Use dscp to set the DSCP value for IGMP messages.
Use undo dscp to restore the default.
The default DSCP value in IGMP messages is 48.
Examples
# Set the DSCP value to 63 for IGMP messages on the public network.
<Sysname> system-view
[Sysname] igmp
[Sysname-igmp] dscp 63
# Set the DSCP value to 63 for IGMP protocol packets in VPN instance mvpn
<Sysname> system-view
[Sysname] igmp vpn-instance mvpn
[Sysname-igmp-mvpn] dscp 63
To Next Page
Loading...
Need help?
General