316
group ipv6-group-address: Displays information about the hosts tracked by MLD that are in the specified
IPv6 multicast group. The value of ipv6-group-address is in the range of FFxy::/16 (excluding FFx0::/16,
FFx1::/16, FFx2::/16, and FF0y::), where x and y represent any hexadecimal number ranging from 0 to
F.
source ipv6-source-address: Displays information about the hosts tracked by MLD that are in the
specified IPv6 multicast source.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display mld host interface to display information about the hosts tracked by MLD on the specified
interface.
Examples
# Display information about the hosts tracked by MLD in multicast group FF1E::101 on layer 3 Ethernet
port Ethernet1/0/1.
<Sysname> display mld host interface ethernet1/0/1 group ff1e::101
Ethernet1/0/1(1::1):
(::, FF1E::101)
Host Uptime Expires
1::1 00:02:20 00:00:40
2::2 00:02:21 00:00:39
Table 70 Command output
Field Descri
tion
Ethernet1/0/1(1::1) Interface and IPv6 address
(::, FF1E::101) (S, G) entry, where "::" indicates all IPv6 multicast sources
Host Host IPv6 address
Uptime Host running duration
Expires Host expiration time, where "timeout" means that the host has expired
display mld host port-info
Syntax
display mld host port-info vlan vlan-id group ipv6-group-address [ source ipv6-source-address ] [ slot
slot-number ] [ | { begin | exclude | include } regular-expression ]
View
Any view
To Next Page
Loading...
Need help?
General