454
all: Soft-resets all IPv6 MBGP connections.
external: Soft-resets IPv6 multicast eBGP connections.
group ipv6-group-name: Soft-resets connections to an IPv6 multicast peer group. The name of the peer
group is a string of 1 to 47 characters.
internal: Soft-resets IPv6 multicast iBGP connections.
export: Performs a soft-reset in an outbound direction.
import: Performs a soft-reset in an inbound direction.
Description
Use refresh bgp ipv6 multicast to soft-reset specified IPv6 MBGP connections. This command allows you
to refresh the IPv6 MBGP routing table and apply a new policy without removing IPv6 MBGP
connections.
To perform an IPv6 MBGP soft reset, be sure that all routers in the network should support route-refresh.
If a peer that does not support route refresh exists in the network, use the peer keep-all-routes command
on the local router to save all route updates from the peer before performing a soft reset.
Examples
# Soft-reset inbound IPv6 MBGP connections.
<Sysname> refresh bgp ipv6 multicast all import
reset bgp ipv6 multicast
Syntax
reset bgp ipv6 multicast { as-number | ipv6-address [ flap-info ] | all | group ipv6-group-name |
external | internal }
View
User view
Default level
2: System level
Parameters
as-number: Resets the connections to IPv6 MBGP peers in the specified AS.
ipv6-address: Resets the connection to the specified peer.
flap-info: Clears routing flap information.
all: Resets all IPv6 MBGP connections.
group ipv6-group-name: Resets the connections to the specified IPv6 MBGP peer group.
external: Resets all the IPv6 multicast eBGP connections.
internal: Resets all the IPv6 multicast iBGP connections.
Description
Use reset bgp ipv6 multicast to reset specified IPv6 MBGP connections to reconnect to the peers.
Examples
# Reset all the IPv6 MBGP connections.
To Next Page
Loading...
