136
display pim join-prune
Syntax
display pim [ all-instance | vpn-instance vpn-instance-name ] join-prune mode { sm [ flags flag-value ]
| ssm } [ interface interface-type interface-number | neighbor neighbor-address ] * [ verbose ] [ | { begin
| exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
all-instance: Specifies all VPN instances.
vpn-instance vpn-instance-name: Specifies a VPN, where vpn-instance-name is a case-sensitive string of
1 to 31 characters.
mode: Displays the information of join/prune messages to send in the specified PIM mode. PIM modes
include sm and ssm, which represent PIM-SM and PIM-SSM respectively.
flags flag-value: Displays routing entries that contain the specified flag. Values and meanings of
flag-value are as follows:
• rpt: Specifies routing entries on the RPT.
• spt: Specifies routing entries on the SPT.
• wc: Specifies wildcard routing entries.
interface-type interface-number: Displays the information of join/prune messages to send on the
specified interface.
neighbor-address: Displays the information of join/prune messages to send to the specified PIM
neighbor.
verbose: Displays the detailed information of join/prune messages to send.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display pim join-prune to display information about the join/prune messages to send.
If neither all-instance nor vpn-instance is specified, this command displays information about the
join/prune messages to send in the public network.
Examples
# In the public network, view the information about join/prune messages to send in the PIM-SM mode.
<Sysname> display pim join-prune mode sm
VPN-Instance: public net
To Next Page
Loading...
Need help?
General