HP 3600 v2 Series

43
Use undo pim-snooping enable to disable PIM snooping in a VLAN.
By default, PIM snooping is disabled.
Before you enable PIM snooping in a VLAN, be sure to enable IGMP snooping globally and specifically
in the VLAN.
PIM snooping does not work in a sub-VLAN of a multicast VLAN.
Related commands: igmp-snooping enable.
Examples
# Enable IGMP snooping globally, and enable IGMP snooping and PIM snooping in VLAN 2.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] pim-snooping enable
reset pim-snooping statistics
Syntax
reset pim-snooping statistics
View
User view
Default level
2: System level
Parameters
None
Description
Use reset pim-snooping statistics to clear statistics for the PIM messages learned by PIM snooping.
Examples
# Clear statistics for the PIM messages learned by PIM snooping.
<Sysname> reset pim-snooping statistics