47
Description
Use port to assign the specified ports to the current multicast VLAN.
Use undo port to delete the specified ports or all ports from the current multicast VLAN.
By default, a multicast VLAN has no ports.
A port can belong to only one multicast VLAN.
You can assign only Ethernet ports, and Layer 2 aggregate interfaces as multicast VLAN ports.
Examples
# Assign ports Ethernet 1/0/1 through Ethernet 1/0/5 to multicast VLAN 100.
<Sysname> system-view
[Sysname] multicast-vlan 100
[Sysname-mvlan-100] port ethernet 1/0/1 to ethernet 1/0/5
port multicast-vlan
Syntax
port multicast-vlan vlan-id
undo port multicast-vlan
View
Ethernet interface view, Layer 2 aggregate interface view, port group view.
Default level
2: System level
Parameters
vlan-id: Specifies a multicast VLAN by its ID, in the range of 1 to 4094.
Description
Use port multicast-vlan to assign the current port to the specified multicast VLAN.
Use undo port multicast-vlan to restore the default.
By default, a port does not belong to any multicast VLAN.
A port can belong to only one multicast VLAN.
Examples
# Assign Ethernet 1/0/1 to multicast VLAN 100.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] port multicast-vlan 100
subvlan (multicast VLAN view)
Syntax
subvlan vlan-list
undo subvlan { all | vlan-list }
To Next Page
Loading...
Need help?
General