118
Default level
2: System level
Parameters
hash-length: Hash mask length in the global scope zone, in the range of 0 to 32. If you do not specify
this argument, the corresponding global setting is used.
priority: Priority of the C-BSR in the global scope zone, in the range of 0 to 255. A larger value of this
argument means a higher priority. If you do not specify this argument, the corresponding global setting
is used.
Description
Use c-bsr global to configure a C-BSR for the global scope zone.
Use undo c-bsr global to remove the C-BSR configuration for the global scope zone.
By default, no C-BSRs are configured for the global scope zone.
Related commands: c-bsr group, c-bsr hash-length, and c-bsr priority.
Examples
# Configure the device to be a C-BSR for the global scope zone in the public network, with the priority
of 1.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] c-bsr global priority 1
# Configure the device to be a C-BSR for the global scope zone in VPN instance mvpn, with the priority
of 1.
<Sysname> system-view
[Sysname] pim vpn-instance mvpn
[Sysname-pim-mvpn] c-bsr global priority 1
c-bsr group
Syntax
c-bsr group group-address { mask | mask-length } [ hash-length hash-length | priority priority ] *
undo c-bsr group group-address
View
Public network PIM view, VPN instance PIM view
Default level
2: System level
Parameters
group-address: Specifies a multicast group address, in the range of 239.0.0.0 to 239.255.255.255.
mask: Specifies the mask of the multicast group address.
mask-length: Specifies the mask length of the multicast group address, in the range of 8 to 32.
hash-length hash-length: Specifies the hash mask length in the admin-scope region that corresponds to
the specified multicast group, in the range of 0 to 32. If you do not specify this argument, the
corresponding global setting is used.
To Next Page
Loading...
Need help?
General