HP 3600 v2 Series User Manual

107
• The number of IGMP group-and-source-specific queries that the IGMPv3 querier sends after
receiving an IGMP report that indicates relation changes between IPv6 multicast groups and IPv6
multicast sources
Related commands: display igmp interface, igmp robust-count, last-member-query-interval,
startup-query-count, timer other-querier-present, and timer query.
Examples
# Set the IGMP querier's robustness variable to 3 globally on the public network.
<Sysname> system-view
[Sysname] igmp
[Sysname-igmp] robust-count 3
# Set the IGMP querier's robustness variable to 3 globally in VPN instance mvpn.
<Sysname> system-view
[Sysname] igmp vpn-instance mvpn
[Sysname-igmp-mvpn] robust-count 3
send-router-alert (IGMP view)
Syntax
send-router-alert
undo send-router-alert
View
Public network IGMP view, VPN instance IGMP view
Default level
2: System level
Parameters
None
Description
Use send-router-alert to globally enable insertion of the Router-Alert option into IGMP messages to be
sent.
Use undo send-router-alert to globally disable insertion of the Router-Alert option into IGMP messages
to be sent.
By default, an IGMP message carries the Router-Alert option.
Related commands: igmp send-router-alert and require-router-alert.
Examples
# Globally disable the insertion of the Router-Alert option in IGMP messages to be sent on the public
network.
<Sysname> system-view
[Sysname] igmp
[Sysname-igmp] undo send-router-alert
# Globally disable the insertion of the Router-Alert option in IGMP messages to be sent in VPN instance
mvpn.
<Sysname> system-view

HP 3600 v2 Series Specifications

General

Brand	HP
Model	3600 v2 Series
Category	Switch
Language	English