336
mld proxying forwarding
Syntax
mld proxying forwarding
undo mld proxying forwarding
View
Interface view
Default level
2: System level
Parameters
None
Description
Use mld proxying forwarding to enable a non-querier downstream interface to forward multicast traffic.
Use undo mld proxying forwarding to disable the forwarding capability of a non-querier downstream
interface.
By default, a non-querier downstream interface does not forward multicast traffic.
Examples
# Enable the multicast forwarding capability on VLAN-interface 100, a non-querier downstream
interface on the MLD proxy device.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] mld proxying forwarding
mld require-router-alert
Syntax
mld require-router-alert
undo mld require-router-alert
View
Interface view
Default level
2: System level
Parameters
None
Description
Use mld require-router-alert to configure the interface to discard MLD messages without the Router-Alert
option.
Use undo mld require-router-alert to restore the default.
To Next Page
Loading...
Need help?
General